| |
SURFACE PREPARATION
New paper-faced wallboard, hardboard, new plaster, fibrous plaster, cement bricks: Brush down with a stiff fibre brush to remove loose and powdery material. Fill cracks with filler, sand and dust down. Apply one coat of Permaplastik Acrylic Sealer Undercoat.
Stir well before use with a broad flat paddle.
Previously painted surfaces: Scrape loose and flaking paint off, sand smooth and dust down. On greasy or dirty surfaces wash with sugar soap.
FINISHING
Apply one or two coats of Permaplastik as required. For optimum results White Permaplastik Acrylic Sealer Undercoat should be used before coating with any Permaplastik colour.
THINNING
Not usually required. On very absorbent surfaces (e.g. set plaster), dampen the surface and thin the first coat with up to 100mL of water per litre.
DRYING TIMES
At approximately 25°C, 30 minutes to touch-dry; 4 hours – dry to recoat. Under cooler or humid conditions allow longer times.
Note: Do not use at temperatures below 10°C. |
|
